Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 46 page image

39POCKET BEEP AND TONE SQUELCH8This function uses subaudible tones for calling and can beused as a “common pager” to inform you that someone hascalled while you were away from the receiver.D Waiting for a call from a specific stationq Set the operating frequency in FM mode.w Push [SET•SKIP ] to enter set mode in the main band.e Push [SET• SKIP ] or [ATT•PRIO] several times until “Ct”(when selecting the tone squelch) or “dt”(when selectingthe DTCS squelch) appears.r Rotate the main band’s [DIAL] to select the desired tonefrequency or DTCS code.t When operating the pocket beep function with DTCS codesquelch, push [SET•SKIP] once then r otate the mainband’s [DIAL] to select the DTCS polarity.y Push any key for the main band to exit set mode.u Push and hold [MONI•T/T-SCAN] for 1 sec. to enter tonesquelch selection mode, then rotate the main band’s[DIAL] until “S ” or “ S” appears to turn thepocket beep function ON with tone squelch or DTCSsquelch, respectively.[MONI•T/T-SCAN][DIAL]Appears when the pocket beepwith tone squelch is turned ON.Appears when the pocket beepwith DTCS squelch is turned ON.DTCS polarity setting[DIAL]Tone squelch frequency setting DTCS code setting[ATT•PRIO][SET•SKIP]■ Pocket beep operation