Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 38 page image

315 MEMORY OPERATION■ Memory bank selectionq Push [VFO/MR•S.MW] to select memory mode in the de-sired band (left or right).w Push [MHz•TS] to enter memory type selection mode.e Rotate the same band’s [DIAL] to select the desired bank(A to H, J to R, T, U, W or Y).• Only programmed banks are displayed.r Push any key for the main band or any of the shared keysbelow the display to set the bank indication.• Bank’s indicator appears at top of the memory channel.t Rotate the same band’s [DIAL] to select the contents inthe bank.y To return to regular memory mode, repeat steps w–r andselect “bAnk --” at step e.• Memory bank indication■ Transferring bank contentsThe bank contents of programmed memory channels can becleared or transferred to another bank.INFORMATION: Even if the bank is cleared of memorychannels, the memory channel contents still remain pro-grammed.q Select the desired bank contents to be transferred orerased from the bank in the main band.➥ Push the main band’s [VFO/MR•S.MW] several timesto select memory mode.➥ Push the same band’s [MHz•TS] then rotate the sameband’s [DIAL] to select the desired memory bank.• Bank’s indicator appears at top of the memory channel.➥ Push any key for the main band or any of the sharedkeys below the display to select the bank then rotate thesame band’s [DIAL] to select the desired contents.[DIAL][MHz•TS][VFO/MR•S.MW]Bank indicator appears[DIAL][MHz•TS][VFO/MR•S.MW]