Icom IC-R2500 Instruction Manual

Also see for IC-R2500: Price list Service manual Instruction manual

Icom IC-R2500 Instruction Manual Manual pdf 56 page image

• Display dimmer• Auto power OFF• Key-touch beep • Beep output level • Display color• Display contrast• Rx TGID indication • Rx Unit ID indication• Auto Rx ID display• Unit ID setting• TGID setting • NAC code setting • P25 unit power setting† Appears when accessing set mode from VFO mode only.‡ Appears when accessing set mode from memory mode only.*1 Available for USA/CANADA versions only.* 2 Appears while in FM mode only.* 3 Appears while in SSB/CW mode only.* 4 Appears when the UT-106 is selected.* 5 Appears when the UT-118 or UT-122 is installed.: Push: PushSETSKIPATTPRIOThese items appearwhen the UT-122 isinstalled, and Optionalitems setting is ON.Set mode itemsfor DV modeare describedon ((page 51)).■ General• Set mode operationq Push the desired band’s [MAIN] to select the main band.w Push [SET•SKIP ] to enter set mode.e Push [SET•SKIP] or [ATT•PRIO] to select the desireditem.r Rotate the main band’s [DIAL] to select the condition orvalue.t Push any key for main band or or any of the shared keysbelow the display to exit set mode.■ Set mode items49SET MODE10