Icom IC-T22A Instruction Manual

Also see for IC-T22A: Instruction manual Instruction manual Service manual Instruction manual Instruction manual

4 ADVANCED FUNCTIONS© Memory name functionEach memory can be programmed with an alphanumericname such as a repeater name, club name, etc.* This function can be selected for each memory channel in-dependently.* This function is not available when the number of memorychannels is expanded to 80.@Push [MR] to select memorymode.@Select a memory channel forname indication.@ Push [FUNC] + [©MeN].*The default name for a memory is“CH" followed by the channel number,e.g. the default name indication formemory channel 01 is “CHO1.”Y NOTE: While using the monitor function, the displayY shows the frequency even when memory name indicationZ is selected.‘» Push [MR] to select memory mode.‘» Rotate [DIAL] (or use the keypad) to select a memorychannel.@ Push [FUNC] + [©MeN] for 1 sec.to enter memory name writingmode.* The character (or cursor) atthe far leftbegins to flash.@ Rotate [DIAL] to select the desiredcharacter; or push [A] to move tothe next position.* Push [V] to move to the previous po-sition.@ Repeat step © until the desiredmemory name is input.*Up to 6 characters can be pro-grammed into a memory name, :© Push [FUNC] + [MeN] to exit ymemory name writing mode.The following characters can be used in names:‘0to9,AtoZ(capitalsonly), (space,(, ),+,—,=,*,/,A,p,and>.NOTE: The programmed memory name is cleared whenoverwriting a memory channel.WS