4 ADVANCED FUNCTIONS@ Pager operation© Calling a specific station@ Program the needed code channel in advance.® Set the operating frequency.® Push [FUNC] + [@PGR/CSQL] once or twice to turn thepager function ON.«“P” appears in place of the 100 MHzdigit.*An optional* tone squelch can beused in conjunction with the pagerfunction.@ Select the desired transmit code channel:‘» Push [FUNC] + [OCODE].‘» Rotate [DIAL] to select the channel.© Push [PTT] to transmit the pager code.© Wait for an answer back.* When the transceiver receives an answer back code, the functiondisplay shows the other members’ ID or group code.@ After confirming a connection push [(vFo)CLR] to displaythe operating frequency.*DO NOT push any digit keys while code channels CO to C5 aredisplayed, or code channel contents are changed.® Push [FUNC] + [®PGR/CSQL] once to select the codesquelch or twice to select the non-selective calling system.© Waiting for a call from a specific station@ Set the operating frequency.@® Push [FUNC] + [®@PGR/CSQL] once or twice to turn thepager function ON.*“P” appears in place of the 100 MHz digit.* An optional* tone squelch can be used in conjunction with thepager function.® Wait for a call.* When receiving a call, the callers’ ID or group code appears asshown at right.*DO NOT push any digit keys while code channels CO to C5 aredisplayed, or code channel contents are changed.@ Push [PTT] to send an answer back call and display the op-erating frequency.® Push [FUNC] + [®@PGR/CSQL] once to select the codesquelch or twice to select the non-selective calling system.