Icom IC-iV85 Instruction Manual

245REPEATER OPERATION12345678910111213141516171819DD Tone informationSome repeaters require different tone system to be accessed.DTMF TONESWhile pushing [PTT], push the desired DTMF keys ([0]–[9],[A], [B], [C], [D], [#] and [✱]) to transmit DTMF tones.• [✱] transmits tone “E,” [#] transmits tone “F.”• The transceiver has 16 DTMF memory channels (p. 32).1750 Hz TONEWhile pushing [PTT], push [YY] or [ZZ] to transmit a 1750 Hztone signal.✔ ConvenientTone scan function: When you don’t know the subaudibletone used for a repeater, the tone scan is convenient for de-tecting the tone frequency.Push [FUNC], then push [T.SCAN ](3) to start the tone scan.• Push [CLR] to cancel the scan.• When the required tone frequency is detected, the scan pauses.■ Repeater lockoutThis function helps prevent interference to other stations byinhibiting your transmission when a signal is received. Thetransceiver has two inhibiting conditions, repeater and busy.q While pushing and holding [YY] and [ZZ], turn the power ONto enter INITIAL SET MODE.w Push [YY] or [ZZ] several times until “RLO” appears.e Rotate [VOL] to select the repeater lockout function to“RP,” “bU” or OFF.• “RP”: Transmit is inhibited when a signal with un-matched sub-audible tone is received.• “bU”: Transmit is inhibited when a signal is received.r Push [✱ ENT] (or [CLR]) to exit INITIAL SET MODE.USING INITIAL SET MODE