Icom IC-iV85 Instruction Manual

5111 SET MODES■ INITIAL SET MODEThe INITIAL SET MODE is accessed at power on and allows youto set seldom-changed settings. In this way, you can “cus-tomize” transceiver operations to suit your preference and op-erating style.DD Entering INITIAL SET MODEq While pushing and holding [YY] and [ZZ], turn power ON.w Push [YY] or [ZZ] to select the desired item.e Rotate [VOL] to select the condition or value.• To exit INITIAL SET MODE, push [✱ ENT] (or [CLR]).DD Key-touch beepTurns key-touch beep emission ON (Beep level 1 to 3) orOFF. (default: 3)NOTE: The pocket beep level (Beep level 1 to 3 or OFF)also changes as this setting.DD Time-out timerTo prevent accidental prolonged transmission, etc., the trans-ceiver has a time-out timer. This function cuts a transmissionOFF after 1–30 min. of continuous transmission. This timercan be cancelled.• tOt.OF : The time-out timer is turned OFF.• tOt. 1–30: The transmission is cut OFF after the set periodelapses. (default: 3)• BE CAREFUL! The transceiver will become hot whenthis time-out timer function is turned OFF and transmis-sion is made for long periods.• NOTE: When the battery pack (BP-227) becomes hotfrom continuous transmittion, etc., the battery’s protectioncircuit may activate to protect the battery itself and thenshut off the transceiver power until it has cooled down.DUP SCANPRIO SET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPA B DCCALLENTMR CLRFUNCPWR98741 2 35 6 0Enter ExitSet[VOL]PWRENTAT POWER ON