Icom IC-iV85 Instruction Manual

286MEMORY/CALL OPERATION12345678910111213141516171819■ Channel name programmingqSelect a “Channel Name Indication” type in INITIAL SETMODE (p. 53).wPush [MR] to select memorymode, if necessary.ePush [FUNC], then push[SET](8) to enter to the channelname programming mode.• The character to be edited blinks.rRotate [VOL] to select a char-acter.tPush [YY] to move the cursor toright, [ZZ] to move the cursor toleft.• Up to 5 characters can be used for channel name.• Usable characters are A–Z, 0–9, “space,” +, –, =, ✱, /, [, ] and :.y Push [✱ ENT] (or [CLR]) to set the name and exit the chan-nel name programming mode.■ Memory transfersThis function transfers a memory channel’s contents to VFO(or another memory/call channel). This is useful when search-ing for signals around a memory channel frequency and forrecalling the offset frequency, subaudible tone frequency etc.D Memory/call ➾ VFOqSelect the memory (call) chan-nel to be transferred:➥ Push [MR] (or [CALL]) to se-lect memory (call channel)mode.➥ Push [YY] or [ZZ] to select thememory channel.• When [VOL] is assigned astuning dial, rotate [VOL] to se-lect the memory channel. (pgs.18, 53)wPush [FUNC], then push andhold [MR] for 1 sec. to transferthe selected memory contentsto the VFO.• VFO mode is selected automatically.DUP SCANPRIO SET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPA B DCCALLENTMR CLRFUNCPWR98741 2 35 6 0[VOL]AFUNCBCALLCMRDUP SCANPRIO SET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPA B DCCALLENTMR CLRFUNCPWR98741 2 35 6 0[VOL]AFUNC8SETCMRENT