Icom IC-iV85 Instruction Manual

306MEMORY/CALL OPERATION12345678910111213141516171819■ Memory bank selectionThe IC-V85 has a total of 10 banks (A to J). Each memorychannel, 0 to 99, may be assigned to one of the banks foreasy memory management.q Push [MR] to select memory mode.w Push [FUNC] and [ BANK ](#) toenter memory bank selection.• Bank indicator blinks.e Rotate [VOL] to select the de-sired bank, A to J.• Banks that have no programmedcontents are skipped.r Push [✱ ENT] (or [CLR]) to selectthe bank.• Indicator stops blinking.t Push [YY] or [ZZ] to select the channel in the bank.• No channel numbers are displayed for memory bank operation.y To return to regular memory condition, push [FUNC] and[BANK ](#) to enter memory bank mode, then push [✱ ENT](or [CLR]).■ Memory bank settingq Push [MR] to select memory mode, then select the desiredmemory channel via [YY] or [ZZ].w Push [FUNC] and [ SET ](8) toenter SET MODE.e Push [YY] or [ZZ] several timesuntil “bAk” appears.r Rotate [VOL] to select the de-sired bank.t Push [✱ ENT] (or [CLR]) to assign the channel to the bankand return to regular memory condition.y Repeat steps q to t to assign another memory channelto the same or another bank.NOTE: Display type setting (pgs. 20, 53) in INITIAL SETMODE must be selected “FR,” otherwise the memory bankoperation cannot be performed.DUP SCANPRIO SET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPA B DCCALLENTMR CLRFUNCPWR98741 2 35 6 0[VOL]AFUNC8SETENTPush MRCDUP SCANPRIO SET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPA B DCCALLENTMR CLRFUNCPWR98741 2 35 6 0[VOL]AFUNCBANKENTPush MRC