Icom IC-iV85 Instruction Manual

276 MEMORY/CALL OPERATIONqPush [CLR] to select VFO mode, if necessary.w Set the desired frequency.eSet other information, such as tone, duplex, as desired.rPush [FUNC], then [MR] momentarily.• “X” and memory channel number blink.tPush [YY] or [ZZ] to select the desired memory channel.• When programming the call channel, select “C.”• When [VOL] is assigned as tuning dial, rotate [VOL] to selectthe memory channel. (pgs. 18, 53)yPush [FUNC], then push and hold [MR] for 1 sec., when 3beeps will sound to program the information into the se-lected memory channel and return to VFO.• After 3 beeps are emitted, continue to hold [MR] to increment thedisplayed memory channel number.DUP SCANPRIO SET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPA B DCCALLENTMR CLRFUNCPWR98741 2 35 6 0AFUNCCMRPWRA147FUNCTONEDUPPRIOB258CALLP.BEEPSCANSETC369SKIPT.SCANMRH/M/LD0CLRBANKOPTENTDUP SCANPRIO SET H/M/LOPTSKIPBANKTONE T.SCANP.BEEPA B DCCALLENTMR CLRFUNCPWR98741 2 35 6 0AFUNCCMR■ Programming the memory/call channels