Icom IC-iV85 Instruction Manual

266MEMORY/CALL OPERATION12345678910111213141516171819■ Selecting a memory channelq Push [MR] to select memory mode.• “X” appears.wEnter 2 digits to select the desired memory channel (orpush the [YY]/[ZZ] keys).• The memory channels 0–9 are proceeded by a “0.”• When [VOL] is assigned as tuning dial, rotate [VOL] to selectthe memory channel. (pgs. 18, 53)■ Selecting the call channel➥ Push [CALL] to select the call channel.• “C” is displayed instead of the memory channel number.• Push [CLR] or [MR] to select VFO or memory mode, respec-tively.Push CALLB“C” appearsPush(Selection example: Memory channel 14)DUPTONE41Push MRCThe transceiver has 107 memory channels including 6 scanedge memory channels (3 pairs), and 1 call channel. Eachof these channels can be individually programmed with op-erating frequency (pgs. 17, 18), duplex direction (p. 22) andoffset (p. 23), subaudible tone encoder or tone squelch andits tone frequency (pgs. 23, 40) and skip information* (p. 37).*except for scan edge memory channels.In addition, a total of 10 memory banks, A to J, are availablefor usage by group, etc.■ General description