JAI LT-200CL User Manual

Contents

JAI LT-200CL User Manual Manual pdf 45 page image

LT-200CL44Refer to 6.3.2 Electronic shutter (Exposure)(Command PER,PEG,PEB) for furtherdetails.8.14 Command GA – Gain level master / G channelAdjust the master gain or G channel gain in accordance with gain mode (GM).GM=0 Master tracking Adjust as master gainAdjusting range is 0 to 802GM=1 Individual gain Adjust for G channelAdjusting range is -402 to 14048.15 Commands GAR and GAB – Red and blue gain levelsIn conjunction with the Command SGR, SGG and SGB, Gain Low or Gain High thisfunction allows the individual setting of gain for all channels. It is important to notethat increasing the gain will lead to an increased noise level and reduced S/N-Ratio.Settings: -402 to 602 (where 100 equals 1dB) (GM=0)-402 to 1404 (where 100 equals 1dB) (GM=1)Associated function: Commands SGR, SGG, SGB, GMApplicable modes: All modesRefer to chapter 6.3.5 Gain control for further details.8.16 Command GM – Gain modeThis command sets the master tracking mode or the individual mode.GM=0 Master trackingGM=1 Individual mode8.17 Command KN – Knee ON/OffThis command activates Knee correction function.Settings: 0=OFF, 1=ON8.18 Commands KSR, KSG and KSB – Knee slope for R, G and BSee command KN for description of this functionSettings: 0 to 65535Associated functions Command KN, Commands KPR, KPG and KPG8.19 Commands KPR, KPG and KPG – Knee point for R, G and BSee command KN for description of this functionSettings: 0 to 1023Associated functions: Command KN, Commands KSR, KSG and KSBRefer to chapter 6.3.7 Knee correction for further details.