LT-200CL508.38 Command TP – Trigger polaritySettings: 0=Active Low (factory default)1=Active High8.39 Command TR – Trigger ModeSelects the trigger mode of the camera. Depending on the mode used, it allows thescan rate to either be programmed by an internal timing generator or by an externaltrigger pulse.Settings: 0=No-Shutter mode1=Shutter-Select mode2=Pulse Width Control (PWC) modeAssociated functions: Command TG (trigger origin)Command TI (trigger input)Command TP (trigger polarity)8.40 Command TS – Test patternThis allows the camera to output a number of test patterns for set-up andtroubleshooting.Settings: 0=off1=Color bar2=Gray wedge3=Gray bars4=White (890LSB)Refer to chapter 6.3.14 Test pattern generator for further details.8.41 Command WB – White BalanceThe white balance function can be used for manual setting, One-Push automatic whitebalance (AWB) and fixed color temperatures (3 selections)Settings: 0=Manual / On-Push AWB1=4000K2=4600K3=5600KApplicable modes: AllAssociated functions: Command AW (Gain)Refer to chapter 6.3.4 White balance for further details.
