JBL SYNTHESIS SDP-45 User Manual

JBL SYNTHESIS SDP-45 User Manual Manual pdf 10 page image

JBL SYNTHESIS SDP-45 Getting Started- 10 -PRODUCT REGISTRATIONPlease register the SDP-45 Digital Controller within 15 days of purchase.Register online at www.jblsynthesis.com. Retain the original sales receiptas proof of warranty coverage.INSTALLATION CONSIDERATIONSThe SDP-45 requires special care during installation to ensure optimalperformance. Pay particular attention to instructions below and to otherprecautions that appear throughout this user guide.DO install the SDP-45 on a solid, flat, level surface such as a table orshelf. The SDP-45 can also be installed in a standard 19-inch equipmentrack using an optional rack-mount kit available from an authorizeddealer.DO select a dry, well-ventilated location out of direct sunlight.DO NOT expose the SDP-45 to high temperatures, humidity, steam,smoke, dampness or excessive dust. Avoid installing the SDP-45 nearradiators and other heat-producing appliances.DO NOT install the SDP-45 near unshielded TV or FM antennas, cableTV decoders, or other RF-emitting devices that might cause interference.DO NOT place the SDP-45 on a thick rug or carpet, or cover theSDP-45 with a cloth, as this might prevent proper cooling.DO NOT place the SDP-45 on a window sill or any location exposed todirect sunlight.DO NOT obstruct the front-panel IR receiver window. The remote controlmust be in line of sight with the IR receiver for proper operation.DO NOT install the SDP-45 on a surface that is unstable or unable tosupport all four feet, unless it is installed in an equipment rack.DO NOT stack the SDP-45 directly above heat-producing equipmentsuch as a power amplifier.CAUTION!Before moving the SDP-45, power the unit off by disconnecting thepower cord from the rear panel and the wall outlet.INCLUDED ACCESSORIESInstallation, Operation and Owners GuideIEC Standard Power CordRemote Control and remote control batteriesUNPACKINGYour SDP-45 was carefully packed at the factory to protect against anydamage in shipping and handling. Carefully examine the packing and theunit for any signs of external damage or impact and report those to yourdealer or JBL prior to using the unit. JBL advises that you keep allpackaging in the event that the unit may have to be returned for service.SAFETYIt is important that you read and completely understand the safetyinstructions and warning on page one of this manual before installing orconnecting the SDP-45 to any electrical power source