JBL SYNTHESIS SDP-45 User Manual
                                                                | |
Contents
| 
JBL SYNTHESIS SDP-45 Setup- 32 -MENU NAVIGATION OVERVIEWFor all menu screens the UP / DOWN / LEFT / RIGHT menu arrows are used to navigate through all the menu screens. If a screen has more options thancan be shown there will be an arrow in the right side of the screen to indicate this.To exit any screen use the LEFT menu arrow.To enter any screen use the RIGHT menu arrow.To change any parameters use the VOL UP or VOL DOWN buttons or the SURR LEFT or SURR RIGHT buttons or the VOLUME KNOB.You must exit the menu before the “Menu Time Out” occurs or your changes will not be saved. Changes are automatically savedwhen exiting the menu.Selecting > from the status menu opens the MAIN MENU. The Main Menu has 2 options, SYSTEM SETUP and SOURCE SETUP.SYSTEM SETUPSelecting SYSTEM SETUP from the MAIN MENU opens the system setup options menu. The items in the System Setup menu include those options thatare global, or effect multiple inputs or sources at a time, as well as any miscellaneous settings. Items that are not in the SYSTEM SETUP MENU includethose options that are source specific, or have the option to be either Source specific or System global.SPEAKER DISTANCES The speaker distances can be set using either METERS (M) or FEET (ft). The units can be changed from the MISCELLANEOUS setup menu. If you areusing a JBL SYNTHESIS SDEC digital EQ/Speaker Processor then leave all the distanced at the default of 2.0m as the JBL SYNTHESIS A.R.C.O.S.calibration system will automatically set all speaker delays in the SDECNOTE |
Related manuals for JBL SYNTHESIS SDP-45
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine