JBL SYNTHESIS SDP-45 User Manual
                                                                | |
Contents
| 
JBL SYNTHESIS SDP-45 Setup- 39 -SOURCE SETUPThe SOURCE SETUP Menu includes all those options that can be set on a per source basis. The sources can also all use the same settings on a globalbasis The SOURCE SETUP menu is controlled by the currently active source in the main zone. For example, the Main Zone is selected to BLU-RAY. Allsource setup parameters that are shown will relate to the BLU-RAY input only.SOURCE INDIVIDUAL: The Factory Default and preferred operation is to use source INDIVIDUAL settings. This setting allows changes to be madethat only apply to the currently selected source. While the parameter is INDIVIDUAL then all source settings can be changed on a per source basis.Changes made do not affect other sources and the settings are outlined below. All menu options contained in the source setup menu are controlled by theGLOBAL/INDIVIDUAL parameter, as well as the default playback modes as shown below.SOURCE GLOBAL: A small letter g will appear on the MAIN MENU to indicate that GLOBAL is turned on. SOURCE SETUP parameters for the currentlyselected source become applicable to all other sources after changing from INDIVIDUAL to GLOBAL. Conversely, changing from GLOBAL toINDIVIDUAL restores the original source parameters present at a time before INDIVIDUAL was previously changed to GLOBAL. It is very important tocheck all sources for proper setup when changing from GLOBAL to INDIVIDUAL.SOURCE SETUP DEFAULTS:SPEAKER SIZE SPEAKER LEVEL CROSSOVER SUBWOOFER TRIGGERS DIGITAL OUT LIP SYNC FORMAT DETECT Surround Mode*FRONT: SMALLCENTER: SMALLSIDE: SMALLREAR: 2 SMALLLEFT: 0dBRIGHT: 0dBCENTER: 0dBSIDE LEFT: 0dBSIDE RIGHT: 0dBBACK LEFT: 0dBBACK RIGHT: 0dBSUBWOOFER: 0dBFRONT: 80hzCENTER: 80hzSIDE: 80hzBACK: 80hzONOFF in 2ch BypassXtra Bass OFF1: ON2: ON3: ONZoneDAC(downmix similar toHeadphone)0ms AUTO 2 channel Input:Dolby PLIIx MovieDolby 5.1 Input:Dolby PLIIx MovieDTS 5.1 Input:7.1 Output5.1 PCM Input:Dolby PLIIx Movie*The surround mode is not selectable, but uses a “last used” memory. If the SOURCE is set to GLOBAL then all sources will use the same surround mode.The settings for each source for Analog Audio, Digital Audio or HDMI Audio input are controlled from the front panel and are not shown in thesetup menu. You do not need to open the setup menu to control these options, and no menu control exists.NOTE |
Related manuals for JBL SYNTHESIS SDP-45
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine