JBL SYNTHESIS SDP-45 User Manual
                                                                | |
Contents
| 
Basic OperationJBL SYNTHESIS SDP-45- 26 -REMOTE CONTROL COMMAND MATRIXBUTTON MAIN ZONE ZONE 2POWER Activates and deactivates standby mode.When standby mode is activated, pressing the power button deactivates standby mode andactivates the SDP-45, including the sources that were activated during the previous operatingsession. The red front panel standby button LED lights to indicate that standby mode isactivated.Note: Power is still supplied to the SDP-45 when standby mode is activated.Note: Zone 2 power on defaults to Full Mute.ON Turns SDP-45 ON. If the SDP-45 is already ON then no action will occur.TEST Turns on the Internal Pink Noise Test withAUTO-CYCLE through all the speaker outputsPress TEST again to turn off Auto-Cycle andturn on MANUAL advance.Press TEST to advance to the next speakerwhen in MANUAL advance.Press the < button to stop.Use the SURR < and SURR > buttons or theVOL Up and VOL DOWN buttons to increaseor decrease speaker output levels.No ActionANLG Toggles 2-Channel Analog Bypass On/Off No ActionSPDIF Toggles Digital (COAX or OPTICAL) On/Off Switched Zone 2 output to the Digital toAnalog Output Main Zone signal. This isshown as DAC for SRC on the 4 linestatus display.HDMI Toggles HDMI Input On/Off No Action |
Related manuals for JBL SYNTHESIS SDP-45
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine