JBL SYNTHESIS SDP-45 User Manual

JBL SYNTHESIS SDP-45 User Manual Manual pdf 15 page image

Basic OperationJBL SYNTHESIS SDP-45- 15 -HARDWARE INPUT CONNECTION DEFAULTSInput HDMI /Video Digital Audio Main Zone Default Zone 21 BLU-RAY 1 S/PDIF 1 HDMI Analog2 SAT/CBL 2 S/PDIF 2 HDMI Analog3 GAME 3 S/PDIF 3 HDMI Analog4 MEDIA PLAYER 4 S/PDIF 4 HDMI Analog5 DVR 5 OPTICAL 1 HDMI Analog6 TV 6 OPTICAL 2 HDMI Analog7 CD 7 AES 1 HDMI N/A8 BALANCED2 8 AES 2 Analog (Balanced) N/A9 USB See Note N/A USB N/A These sources do not have any video assigned to their inputs. The last usedvideo source will remain active when selecting these inputs. To select a videosource first select the active video source and then select the 7.1 or USBinput. If no video is required then do not first select a video source.10 7.1 Bypass See Note N/A Analog N/AOUTPUT CONNECTIONS WHEN USED WITH A JBL SYNTHESIS SYSTEMWhen used with a JBL Synthesis SDEC-3000, SDEC-4000 or SDEC-4500 Digital EQ/Speaker Processor the system should have been purchased with theappropriate JBL Synthesis Interconnect Kit, such as S3000IC or S4500XLRIC (or similar). All the interconnect kits come with numbered XLR or RCAinterconnect cables. Use the below chart to connect the 7.1 audio output of the SDP-45 to the correct interconnect cable and input on the SDEC model.All SDEC models use the same input configuration and numbering.Cable NumberFrom Synthesis Interconnect Kit Channel SDEC Input1 FRONT LEFT A12 FRONT RIGHT A23 CENTER A34 SIDE LEFT A45 SIDE RIGHT B16 REAR LEFT B27 REAR RIGHT B38 SUBWOOFER B4NOTE