Jet VBS-18MW Operating Instructions And Parts Manual

Also see for VBS-18MW: Specifications Brochure

Jet VBS-18MW Operating Instructions And Parts Manual Manual pdf 6 page image

6IntroductionThis manual is provided by Walter Meier (Manufacturing), Inc., covering the safe operation andmaintenance procedures for a JET Model VBS-18MW Band Saw. This manual contains instructions oninstallation, safety precautions, general operating procedures, maintenance instructions and partsbreakdown. This machine has been designed and constructed to provide years of trouble free operation ifused in accordance with instructions set forth in this manual. If there are any questions or comments,please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our website: www.waltermeier.com.SpecificationsModel Number .................................................................................................................... VBS-18MWStock Number .......................................................................................................................... 414418Cutting Capacity (height) (in.) ............................................................................................................ 12Cutting Capacity (width) (in.)........................................................................................................ 18-3/8Maximum Rip Left of Blade w/Fence (in.) ..................................................................................... 16-1/2Blade Length (in.) ........................................................................................................................... 137Blade Speeds (SFPM):High Gear .............................................................................................................1000, 1800, 3200Low Gear..................................................................................................................... 80, 150, 265Minimum Blade Width (in.) ............................................................................................................... 1/8Maximum Blade Width – Wood (in.) ............................................................................................... 1-1/2Maximum Blade Width – Metal (in.) ...................................................................................................... 1Table Size (in.) ..........................................................................................................................19 x 19Front of Table to Center of Blade (in.) ................................................................................................ 10Table Tilt (deg.) .................................................................................................................45°R to 10°LTable Height from Floor (in.) ........................................................................................................ 37-1/2Wheel Diameter (in.) ................................................................................................................... 18-5/8Dust Port Diameter (in.)...................................................................................................................... 4Overall Dimensions (HxWxD) (in.)....................................................................................... 74 x 42 x 38Motor .................................................................................... 1-3/4 HP, 1Ph, 115/230V (pre-wired 115V)Net Weight – approximate (lbs.)....................................................................................................... 456The above specifications were current at the time this manual was published, but because of our policy ofcontinuous improvement, Walter Meier reserves the right to change specifications at any time and withoutprior notice, without incurring obligations.Grounding InstructionsElectrical connections mustbe made by a qualified electrician incompliance with all relevant codes. Themachine must be properly grounded to helpprevent electrical shock and possible fatalinjury.In the event of a malfunction or breakdown,grounding provides a path of least resistance forelectric current to reduce the risk of electricshock. This tool is equipped with an electric cordhaving an equipment-grounding conductor and agrounding plug. The plug must be plugged into amatching outlet that is properly installed andgrounded in accordance with all local codes andordinances.Do not modify the plug provided. If it will not fitthe outlet, have the proper outlet installed by aqualified electrician.Improper connection of the equipment-grounding conductor can result in a risk ofelectric shock. The conductor, with insulationhaving an outer surface that is green with orwithout yellow stripes, is the equipment-grounding conductor. If repair or replacement ofthe electric cord or plug is necessary, do notconnect the equipment-grounding conductor to alive terminal.Check with a qualified electrician or servicepersonnel if the grounding instructions are notcompletely understood, or if in doubt as towhether the tool is properly grounded. Use onlythree wire extension cords that have three-pronggrounding plugs and three-pole receptacles thataccept the tool’s plug.