KERN CME 100-3 Operating Instruction

KERN CME 100-3 Operating Instruction Manual pdf 11 page image

CDE/CME/CDEE-BA-e-1014 11Therefore, observe the following for the installation site:• Place the balance on a firm, level surface;• Avoid extreme heat as well as temperature fluctuation caused by installing next toa radiator or in the direct sunlight;• Protect the balance against direct draughts due to open windows and doors;• Avoid jarring during weighing;• Protect the balance against high humidity, vapours and dust;• Do not expose the device to extreme dampness for longer periods of time. Non-permitted condensation (condensation of air humidity on the appliance) may occurif a cold appliance is taken to a considerably warmer environment. In this case,acclimatize the disconnected appliance for ca. 2 hours at room temperature.• Avoid static charge of goods to be weighed and weighing container.Major display deviations (incorrect weighing results) may be experienced shouldelectromagnetic fields (e.g. due to mobile phones or radio equipment), staticelectricity accumulations or instable power supply occur. Change location or removesource of interference.6.2 UnpackingCarefully remove the balance from the packaging, remove plastic cover and setupbalance at the intended workstation.6.2.1 PlacingThe balance must be installed in a way that the weighing plate is exactly in horizontalposition.6.2.2 Scope of deliverySerial accessories:Models CME Models CDE• Balance • Terminal• Mains power supply • Platform• Operating Manual • Mains power supply• Protective cover• Operating Manual