KERN CME 100-3 Operating Instruction

KERN CME 100-3 Operating Instruction Manual pdf 31 page image

CDE/CME/CDEE-BA-e-1014 31SymbolsM Blank or MS Blank or minus sign (-)N1 … N10 10 numeric ASCII codes for weight values including decimal places orblanksU1 … U3 3 ASCII codes for weighing unit pcs. / % / or blankB BlankE, o, r ASCII code or “E, o, r”CR Carriage ReturnLF Line Feed9.5 Output on bar code printerThe data transfer mode has to be set on „BA Pr“.As bar code printer the Zebra printer model LP2824 is provided.Take into account that the output format of the balance is fixedly defined and cannotbe changed.The printer format is stored in the printer, i.e. in case of a failure the printer cannot bechanged with a new one from factory, previously it is necessary that KERN installsthe respective software.The Zebra printer and the balance must be connected to the delivered interface cablewhen they are switched off.After switching-on both appliances, and after reaching the status ready-for-operation,a label will be printed out when pressing the PRINT button.