KERN CME 100-3 Operating Instruction

KERN CME 100-3 Operating Instruction Manual pdf 26 page image

CDE/CME/CDEE-BA-e-1014269 Data output RS 232 C9.1 Technical data• 8-bit ASCII Code• 1 start bit, 8 data bits, 1 stop bit, no parity bit• Baud rate selectable at 1200, 2400, 4800, 9600 and 19200 Baud• Miniature plug-in necessary (9 pole D-Sub)• For operation with interface faultless operation is only ensured with the correctKERN – interface cable (max. 2m)9.2 Pin allocation of the balance output socket (front view)5 19 6Pin 2: Transmit dataPin 3: Receive dataPin 5: Signal ground9.3 Interface parameterGeneral InformationThe previous condition for the data transfer between balance and a periphericaldevice (e.g. printer, PC) is that the appliances are set to the same interfaceparameters (e.g. baud rate, transfer mode).9.3.1 Data transfer modeÖ With the weighing scale switched off, press ON/OFF and TARE-keysimultaneously until the first function “Unit“ appears.Ö Repeatedly press the 10x-key until “PR“ appears.Ö Confirm by pressing the PRINT-key. Current setting appears.Ö Now you can use the 10x-key to select among the different settings(see chpt. 8.3)Ö Changed setting will be imported by pressing the PRINT key. The balancereturns automatically into weighing mode.