KERN CME 100-3 Operating Instruction

KERN CME 100-3 Operating Instruction Manual pdf 27 page image

CDE/CME/CDEE-BA-e-1014 279.3.2 Baud rateThe baud rate necessary for the measuring values transfer can be set.In the following example the baud rate is set to 9600 baud.Ö With the weighing scale switched off, press ON/OFF and TARE-keysimultaneously until the first function “Unit“ appears.Ö Repeatedly press the 10x-key until “bAUd“ appears.Ö Confirm by pressing the PRINT-key. Current setting appears.Ö Now you can use the 10x-key to select among the different settings(see chpt. 8.3)Ö Changed setting will be imported by pressing the PRINT key. The balancereturns automatically into weighing mode.9.3.3 Selection printed editionUse this function to select which data are sent via the RS232C interface.To achieve this, follow the sequence of operations below:Ö With the weighing scale switched off, press ON/OFF and TARE-keysimultaneously until the first function “Unit“ appears.Ö Repeatedly press the 10x-key until “LAPr“ appears.Ö Confirm by pressing the PRINT key.Ö Now you can use the 10x-key to select among the output parameters below:Display Status Function„Hdr“ On / Off Edition of the headlines„GrS“ On / Off Edition of the total weight„Net“ On / Off Edition of the net weight„tAr“ On / Off Edition of the tare weight„N7E“ On / Off Edition of the stored weight„PCS“ On / Off Edition of quantity„AUJ“ On / Off Edition of the unit weight„rqt“ On / Off Edition of the reference quantity„FFd“ On / Off Edition of a page feeding„FFE“ On / Off Edition of a page feedingat end printer output