KERN CME 100-3 Operating Instruction

KERN CME 100-3 Operating Instruction Manual pdf 17 page image

CDE/CME/CDEE-BA-e-1014 177.6 Plus/minus weighingsFor example unit weight control, fabrication control etc.Ö In weighing mode, place target weight on weighing platform and tare to “0“bypressing the TARE-key. Remove the nominal weight.Ö Put the test objects subsequently on the weighing plate, the respective deviationfrom the nominal weight is displayed with the respective sign to „+“ and „-“.According to the same procedure also packages with the same weight can beproduced, referring to a nominal weight.Back to weighing mode by pressing the TARE button.7.7 Parts counting1 2 3 41. Place empty vessel on weighing platform and tare by pressing the key(TARE)2. Fill vessel with reference piece number of count quantity (e.g. 5, 10, 20items)3. Confirm reference piece number by pressing the key (5, 10, 20). Removereference weight. The balance is now in parts counting mode counting allunits on the weighing plate.4. Fill with count quantity. The piece number is shown directly on the display.By pressing the button the balance returns to the weighing mode and displays theweight of the counted units.Important: The larger the reference quantity, the more accurate the partscounting.For minimum count weight see table “Specifications“. If weight falls short of this,“Error“ will be shown on the display and the weighing scale will return automaticallyto weighing mode.