KERN KLB-TM Operating Manual

Contents

KERN KLB-TM Operating Manual Manual pdf 22 page image

Is the parameter set to ALL in menu 4.1.FFun, access to the functions set to YES inthe P4FFunc menu is available via the F key.(See chpt. 8.5.1)However, if in menu 4.1.FFun one of the above parameters is selected, e. g. PcS,the F key can merely be used to call just this particular menu item.8.5.1 Settings for menu item P4.1 FFun for “ALL”Here, you select the menu items that are subsequently selectable with the F key. nofunction not available.YES function is available.Operation: Display:Ö Selecting the menu item P4 FuncÖ Press TARE key 4.1.FFunÖ Press the a key 4.2.FuniÖ Press the a key until the operating mode “piececounting” appears 4.3.PcSÖ Press the TARE key until active setting appears:“no“ = deactivated, “yes“ = activated noÖ To change the setting, press the a key. YESÖ Setting will be imported by pressing the PRINT key. 4.3.PcSÖ Press the a key until the operating mode“tolerance weighing” appears. Activation asdescribed for piece counting4.4.HiLoPlease repeat this sequence of operations for any other operating mode available.4.2.Funi4.3.PcS4.4.HiLo4.5 PrcA4.6 Prcb4.7 AtAr4.8 toP4.9 AddFor this, press the F key repeatedly until SavE ? appears on the display. Storechanges carried out by pressing the PRINT key.KLB-TM-BA-e-081122