KERN KLB-TM Operating Manual

Contents

KERN KLB-TM Operating Manual Manual pdf 37 page image

8.13 Summation of weighing valuesThis function enables you to determine the sum of several weighings.The current sum of the last weighings is shown when the arrow pointing to the sigmasummation sign (∑) above the display is active.Operation: Display:Ö Turn on display unit by pressing the ON/OFF key 0.000 kgÖ Press F -key 1 FuniÖ Repeatedly press the a key until 8 Add appears 8 AddÖ Press TARE key P 0.000 kgÖ Place weight (e.g. 0.2 kg) on weighing plate 0.200 kgÖ Press print key (import to summation memory) ∑ 0.200 kgÖ Remove weight P 0.000 kgÖ Place weight (e.g. 0.5 kg) on weighing plate 0.500 kgÖ Press print key (import to summation memory) ∑ 0.700 kgÖ To cancel current summation, press the Print key again,and the following message will appear unLoAdÖ Unload weighing plate P 0.000 kgÖ Place weight for next summation 1.000 kgÖ Press Print key (import to summation memory) etc. ∑ 1.000 kgGo back to weighing mode by pressing the F key twice.Once again, the value for the sum will be stored when this function is cancelled (bydisconnection or power cut) and you may continue from where the interruption tookplace. To achieve this, call the function as described above and the sum so far willappear automatically.If the display range of the display unit is exceeded by the sum total, “5-Full” willappear.KLB-TM-BA-e-0811 37