KERN KLB-TM Operating Manual

Contents

KERN KLB-TM Operating Manual Manual pdf 26 page image

8.6.5 Battery status displayThis function is used to display the charge status of the battery.Operation: Display:0.00 gÖ Press the F key and TARE key simultaneously battÖ 1 second later 94%Ö 2 seconds later 0.00 gThe display unit returns to weighing mode after the charge status of the battery wasshown. The display symbol (bat low) will be activated when the charge status ofthe battery drops below 18%.8.6.6 Charge displayThis function can be used to suppress the charge function.This suppresses the short illumination of the battery symbol if the weighing unit isoperated without battery or accumulator. (supply by power pack)The kind of supply is shown when the balance is started. bAtt / SLA / nlnnHCHr6 YES nlnnH Function activated / 6 x NiMH battery in useCHr6 YES SLA Function activated / SLA battery in useCHr6 no bAtt Battery operationATTENTION! Explosion hazard: For battery operation the setting must be noOperation: Display:Ö Selecting the menu item P5 othrÖ Press TARE key 5.1.blÖ Repeatedly press the a key until the followingdisplay appears 5.5. CHr6Ö To change your selection, press the TARE key. noÖ To change your selection, press the a key. YESÖ Setting will be imported by pressing the PRINT key. 5.5.CHr6KLB-TM-BA-e-081126