Kaba E-PLEX 2000 Operation Manual

Also see for E-PLEX 2000: Operation manual Installation instructions Installation instructions Quick reference guide

Contents

Kaba E-PLEX 2000 Operation Manual Manual pdf 11 page image

21202. Enter Command 299# to delete all Access and ServiceUser Codes.3. Enter another # to indicate the end of programming.4. You have now deleted all User Access Codes, allowing you tore-assign Access Codes from 0000{0000} to 9999{9999}, if notused by Master or Managers.Procedure 8 - Activate User Access CodesA User Code should be activated if it has been de-activated for a certaintime period - during a user’s vacation, for example, or if you created anAccess Code but never assigned it to a user. User Codes that are inactive,but might be needed some time in the future, should be de-activatedrather than deleted.Required User Level: Master, Manager1. Put the lock into Pushbutton Programming Mode.2. Enter Command 300# to activate a User Code.3. Enter the ID location NNN #, where NNN is the specific User IDlocation, 023 for example.4. Example of complete entry: 300 #023#.5. Enter another # to indicate the end of programming.6. You have now activated the User Access Code assigned to 023.Procedure 9 - Activate Manager Access CodeA Manager Code should be activated if it has been de-activated for acertain time period - during a Manager’s vacation, for example, or if youcreated a Manager’s Code, but never assigned it to anyone.Required User Level: Master1. Put the lock into Pushbutton Programming Mode.2. Enter Command 301# to activate a Manager Access Code.3. Enter the ID location NNN#, where NNN is the specific User IDlocation, 024 for example.4. Example of Complete Entry: 301#024#.2. Enter Command 201# to delete a Manager Code.3. Enter the ID location NNN#, where NNN is the specific ManagerID location, 024 for example.4. Example of complete entry: 201#024#.5. Enter another # to indicate the end of programming.You have now deleted a Manager ID location, and (indirectly) his AccessCode, allowing you to assign that number to another Manager or AccessUser if you wish.Procedure 6 - Delete Service User Access CodesA Service User Access Code is automatically deleted at the end of itsspecified length of time. However, use this procedure if you want todelete the code earlier than the specified expiry time.Required User Level: Master, Manager1. Put the lock into Pushbutton Programming Mode.2. Enter Command 202# to delete Service User Access Code.3. Enter the ID location NNN#, where NNN is the specific ServiceUser ID location, 025 for example4. Example of complete entry: 202#025#.5. Enter another # to indicate the end of programming.6. You have now deleted a Service User ID location, and (indirectly)his access code, allowing you to assign that number to anotherService User if you wish.Procedure 7 - Delete All Access Codes Except Masterand ManagerAll codes may be deleted together if you are changing everythingbecause of, for example, suspected theft of codes. Warning - be surethat you want to do this, because re-creating codes for all the personnelwill be time-consuming at the pushbuttons.Required User Level: Master, Manager1. Put the lock into Pushbutton Programming Mode.