Kaba E-PLEX 2000 Operation Manual

Also see for E-PLEX 2000: Operation manual Installation instructions Installation instructions Quick reference guide

Contents

Kaba E-PLEX 2000 Operation Manual Manual pdf 7 page image

1312Note: Correct errors during a command sequence. If an invalidentry occurs, recover from the mistake by entering the (*) key, which willclear all entries made from the beginning of the current commandsequence, and will reset the 15-second time limit for entering the code.In this case, you still have 15 seconds from the first number entered toenter the whole code.User LevelsFour different classifications of users can perform various operations atthe lock.Master User - The Master User is the top-level manager who performsthe initial lock setup activities and can program all lock functions. Thereis a maximum of one Master User per lock.Manager - A Manager can program all lock functions except:• defining the Access User Code length• modifying master user Access Code• resetting to default value• activating lockout mode• adding / deleting / enabling / disabling a Manager User. Thenumber of Managers is limited only by available user tablespace (99 maximum because one (000) is reserved for theMaster Code).Access User - An Access User has the ability to open the lock. Thenumber of Access Users is limited only by available user table space (99maximum because one (000) is reserved for the Master Code).Service User - A user with an Access Code valid for a configurable periodof time. This period of time starts on the first use of the code. Each ServiceUser combination is automatically deleted after its period of time expires.The number of service users is limited only by available user table space(99 maximum because one (000) is reserved for the Master Code).Note: The total number of codes enrolled into the lock at any giventime cannot exceed 100, regardless of code classification.User CodesEach time you add a user to give access to a door, you must program thedoor with an Access Code for them. This User Access Code can also bereferred to as a PIN (Personal Identification Number). If you modify theAccess Code for an existing user, the procedure is the same.User Codes must not have the exact same numbers in the sameposition as the Master Code.The Master Code 00004992 is used as an example in the table below.User Access Codes (PINs) - ExamplesMaster Code User Code Length Sample User CodesAcceptable Unacceptable00004992 4 digits 100000051206000100004992 5 digits 3200000006001000004400004992 6 digits 00104100004640049200004800004992 7 digits 000552120004999900872100089200004992 8 digits 80009765120066540000499340004992000000004000049000049900004992