212. Basic OperationsThe transmitted program number is shown in the display.3001:000-000 01You can also send program change numbers by using VALUE buttons.Note:Full program change numbers including bank numbers can be transmitted bysetting them in MENU and saving it as a SETUP. See page 39/40 for details.2.9 Selecting a SETUPThe MP6 offers 256 preset combinations of the panel settings called SETUPs.To select a SETUP, press the SETUP button. Now the SOUND SELECT buttons areused to select a SETUP. Use a combination of the numbers in the upper, secondand third rows to select a desired SETUP. The display will show the selectedSETUP name.GrandPno1+Str1To check the sound (internal) or program number (external) assigned to eachzone, press the ZONE SELECT button. The display briefly shows the assignedsound name or program number, and then automatically returns to the SETUPname in a few seconds.If you hold a ZONE SELECT button for 2 seconds the display will show you thekey range information for that zone. You can also set the key range using thesame procedure that is used in Sound mode.
