Kawai MP6 Owner's Manual

Also see for MP6: Brochure & specs Owner's manual

Contents

Kawai MP6 Owner's Manual Manual pdf 32 page image

325. Control Knobs5.4 ASSIGNThe ASSIGN button can be used to set the CONTROL KNOBS to send MIDIContinuous Controller information to external MIDI devices, or to control theMP6’s Amp Simulator function.5.4.1 Amp Simulator parameterIf the Amp Simulator is turned on, pressing the ASSIGN button allows the AmpSimulator parameters to be adjusted using the CONTROL KNOBS.Drv Lvl Lo Hi0 127 0 0Note:The Amp Simulator is effective for Zone 1 only.* Please refer to page 38 of this owner’s manual for further information aboutthe Amp Simulator.5.4.2 MIDI CC# (Control Change)If the Amp Simulator is turned off, pressing the ASSIGN button allows MIDIContinuous Controller information to be sent using the CONTROL KNOBS.The MP6 can send any MIDI Continuous Controller information to any MIDIInstrument or Device. This powerful feature allows for editing the sounds of anexternal sound module in Real Time during performance, or for recording RealTime performance edits to a MIDI sequencer.Some control changes are also effective to internal sounds.Make sure that the ASSIGN button in the CONTROL KNOBS section is lit. If theASSIGN button is turned off, press it to turn it ON.The CONTROL KNOBS are now active and assigned to the MIDI CC parameters.Use the CONTROL KNOBS to change the MIDI continuous controller informationassigned to each knob as described below.Each parameter of the Control Change has an adjustable range from 0 to 127.When the selected zone is set to INT or BOTH, the display shows the parameternames.1PAN STN VbR3VbD-0 0 0 0When the selected zone is set to EXT, the display shows the MIDI CC numbers.3010 070 076 0776-4 64 64 64