Kawai MP6 Owner's Manual

Also see for MP6: Brochure & specs Owner's manual

Contents

Kawai MP6 Owner's Manual Manual pdf 41 page image

416. MENU Buttons6.2.27 Solo ModeThis parameter determines which note will be played when Solo is ON and morethan one note is being played simultaneously. There are three choices for Solonote priority.Last The most recently played note within a group of notes will be heard whenSolo is ONHi The highest note played within a group of notes will be heard when Solois ON.Low The lowest note played within a group of notes will be heard when Solo isON.* When the Solo Mode parameter is “Off”, this page will not be displayed.6.2.28 DamperThis parameter determines if the damper pedal is active (Norm [Int] / On [Ext],with natural decay), deactivated (Off) or set to HOLD (On, with steady sustainlevel) for the selected zone.Use the HOLD value, if you don’t want a sound to disappear. HOLD is onlyavailable for internal Sounds.6.2.29 Foot SwitchThis parameter determines if a Foot Switch connected to the FOOT SWITCH jackis active (On) or not (Off) for the selected zone. The type of controller assignedto the footswitch is a common Setup parameter and is used for all zones of aSetup as a global parameter.6.2.30 Expression PedalThis parameter determines if an Expression Pedal connected to the EXP jack isactive (On) or not (Off) for the selected zone. The type of controller assigned toExpression pedal is a common Setup parameter and is used for all zones of aSetup as a global parameter.6.2.31 ModulationThis parameter determines if the Modulation Wheel is active (On) or not (Off) forthe selected zone.* When the Tone Wheel sound is selected, this page will not be displayed.1 Concert GrandSolo Mode =Last1 Concert GrandSolo Mode =Last1 Concert GrandDamper = On1 Concert GrandDamper = On1 Concert GrandFoot SW = On1 Concert GrandFoot SW = On1 Concert GrandExp Pedal = On1 Concert GrandExp Pedal = On1 Concert GrandModulation = On1 Concert GrandModulation = On