Kawai MP6 Owner's Manual

Also see for MP6: Brochure & specs Owner's manual

Contents

Kawai MP6 Owner's Manual Manual pdf 47 page image

476. MENU Buttons6.3.7 Modulation Wheel CC# (Control Change)This parameter assigns a Control Change Number to the Modulation Wheel onthe right side of the front panel.If “AFT” is selected, the modulation wheel is used to send After Touch information.If “RTR” is selected, the modulation wheel is used to switch the speed of therotary speaker between slow and fast when the Rotary effect is in use.If “AMP” is selected, the modulation wheel is used to turn the AMP simulatoron/off.See page 96 for the list of Control Change numbers.Note:When the following Numbers are selected for the FootSW,EXP or ModulationWheel Control Change Number, the functions affect the internal sounds, too.1 Modulation Wheel (MOD)7 Volume (VOL)10 Pan (PAN)11 Expression Controller (EXP)64 Damper Pedal (HLD)66 Sostenuto (SST)67 Soft Pedal (SFT)6.3.8 Left Pedal ModeThis parameter determines whether the left pedal of the optional F-20 (twinpedal) accessory functions as Soft or Sost (Sostenuto).Left PedalRight Pedal(FSW)F-206.3.9 Master VolumeAdjust the total volume of the SETUP.The value changes from 0 to 127.COMMONM.WheelCC# = ModCOMMONM.WheelCC# = ModCOMMONLeft Pedal =SoftCOMMONLeft Pedal =SoftCOMMONSMaster Vol= 127COMMONSMaster Vol= 127Soft The Left Pedal works as a Soft Pedal ( Default ).When the Rotary EFX is in use, the Soft Pedalchanges function to a Fast/Slow Rotor switch.Sost The Left Pedal works as a Sostenuto Pedal.When the Damper setting (see page 41) is Off orNorm, the sostenuto pedal works with naturaldecay. When the Damper setting is Hold, thesostenuto pedal works with a steady sustain level.