Kawai MP6 Owner's Manual

Also see for MP6: Brochure & specs Owner's manual

Contents

Kawai MP6 Owner's Manual Manual pdf 55 page image

559. STORE Button9. STORE ButtonYou can save the changes of the settings made as either a SOUND or a SETUP.Up to 256 SOUNDs or 256 SETUPs can be stored.Moreover, the POWER ON function allows preferred panel setting to be storedin the instrument's memory, and automatically recalled as the settings everytime the MP6 is turned on.The following groups of parameters are stored:SOUNDSelected Zone’s One Sound settings:* EFX/REVERB settings (see page 26)* Control Knob settings - except for EQ (see page 28)* Int Zone parameters in MENU settings (see page 34)- except for parameters with the inverse “S(Setup)” iconSETUPMP6’s whole settings of 4 zones:* Sound Selection, Zone On/Off Status (see page 10)* EFX/REVERB settings (see page 26)* Fader, Control Knob settings (see page 10, page 28)* Function SW setting (see page 22)* All MENU settings (see page 34)* Metronome settings (see page 18)9.1 Storing the settings as a SOUNDPress the STORE button. The display will show the following screen: SOUND>Press the VALUE c button, the display will show the following screen:SOUND Sure?Press VALUE UPPress the VALUE c button to confirm. The STORE procedure can be cancelledat any time by pressing any other button which is not used during the STOREprocedure.Writing Memory,Completed!Note:Storing will overwrite the selected SOUND.If the selected zone is external, the SOUND cannot be stored.