Kenwood DDX9020DABS Instruction Manual

Troubleshooting104Error MessagesWhen you fail to operate the unit correctly, thecause of the failure appears as the message onthe screen.There is an error in the speaker wiring. Pleasecheck the connections.Protective circuit has been activated because a speakercord has shorted or it has come in contact with the carchassis.h Wire or insulate the speaker cord as appropriate andturn the power off and on again.Hot ErrorWhen the internal temperature of this unit rises to 60°Cor more, the protection circuit is activated and you maynot be able to operate the unit.h Use the unit again after reducing the temperatureof the unit.Mecha ErrorThe disc player is malfunctioning.h Eject the disc and try inserting it again. Contact theKENWOOD dealer if this indicator continues blinkingor the disc cannot be ejected.Disc ErrorAn unplayable disc is inserted.h Change the disc. See Playable Media and Files(P.105).Read ErrorThe disc is quite dirty.h Clean the disc. See Precautions on handling discs(P.6).Disc is upside down.h Load the disc with the labeled side up.Region Code ErrorThe disc you wanted to play has a region code thatcannot be played with this unit.h See Region Codes in the World (P.107) or tryanother disc.Error 07–67The unit is not operating correctly due to some reasonor other.h Turn the power off and on again. If the “Error 07−67”message does not disappear, contact your nearestKENWOOD dealer.No Device (USB device)The USB device is selected as a source although no USBdevice is connected.h Change the source to any source other than USB/iPod. Connect a USB device, and change the sourceto USB again.Disconnected (iPod, Bluetooth audio player)The iPod/Bluetooth audio player is selected as a sourcealthough no iPod/Bluetooth audio player is connected.h Change the source to any source other than iPod/Bluetooth. Connect an iPod/Bluetooth audio player,and change the source to iPod/Bluetooth again.No Media fileThe connected USB device contains no playable audiofile. Media was played that doesn’t have data recordedthat the unit can play.h See Playable Media and Files (P.105) and tryanother USB device.The USB device which contains no playable audiofile is selected. (DDX9020DABS / DDX920WDABS /DMX8520DABS)h Switch USB devices. See [USB DEVICE CHANGE](P.41).USB device over current status detected.The connected USB device is rated a current capacityhigher than the allowable limit.h Check the USB device. Some trouble may haveoccurred to the connected USB device.h Change the source to any source other than USB.Remove the USB device.Ñ Apple CarPlayThe GPS antenna must be connected to useApple CarPlay wirelessly. Please verify the properconnections or plug in by USB to use AppleCarPlay.The GPS antenna is not connected when the AppleCarPlay is started by connecting wirelessly or whenthe iPhone compatible with wireless Apple CarPlay isregistered in [Apple CarPlay Device List].h Check the connection of the GPS antenna or plug inover USB to use Apple CarPlay.The speed sensor and the GPS antenna must beconnected to use Apple CarPlay wirelessly. Pleaseverify the proper connections or plug in by USB touse Apple CarPlay.The speed pulse is not detected and the GPS antennais not connected when the Apple CarPlay is started byconnecting wirelessly or when the iPhone compatiblewith wireless Apple CarPlay is registered in [AppleCarPlay Device List].h Check the connection of the speed pulse and theGPS antenna or plug in over USB to use AppleCarPlay.