Kenwood DDX9020DABS Instruction Manual

Connection/Installation95English4) Rub the film antenna (accessory ~) gentlyin the direction of the arrow shown below tofirmly stick it to the windscreen.5) Remove the second sheet (tag 2) on the filmantenna (accessory ~) vertically.Sheet (tag 2)6) Match the protrusions of the amplifier unit(accessory !) with the T markings on thefilm antenna (accessory ~) and attach theamplifier.Do not touch the lead terminal or theadhesive side of the amplifier unit (-).When installing the antenna on the rightside~ Earth sheetMatch the protrusionwith the 5 markLead contact ofthe amplifier unit(metal part)Lead terminal of the filmantenna (~)!When installing the antenna on the leftside~!Earth sheet7) Remove the film covering the earth sheet andattach the earth sheet to the metal part of thevehicle.Provide sufficient space for the earth sheetso that it does not obstruct the interior parts(front pillar cover). Also take care that theinterior parts do not obstruct the amplifierunit (accessory !).Earth sheetFont pillar cover! Front pillarFront glass8) Wire the antenna cables.Use cord clamper (accessory -) to secure theantenna cable to the pillar in several places.9) Reattach the front pillar cover.10) Be sure not to damage the earth sheetand amplifier unit (accessory !) whenreattaching.11) Connect the amplifier unit (accessory !) tothe DAB input terminal on the rear of theunit.12) Set [Antenna Power] to [ON]. (P.52)