Kenwood DDX9020DABS Instruction Manual

Setup73English5 Touch [Learning completed].NOTE• When changing the function already learned,press and hold the button you want to changein step 2 and then touch to select the changedfunction from the function list.• Confirm the contents of the settable function onthe function list. You cannot edit the function list.• To initialize the contents, touch [Learninginitialisation] of [Steering RemoteController] in User Interface screen. After youtouch [Initialise], a confirmation messageappears. Follow the message and complete theoperation.Ñ Register operations by GestureControl (DDX920WDABS)You can register operations that work by themotion of your hand.1 Touch [Gesture SETUP] on the UserInterface screen.hh Gesture SETUP screen appears.2 Touch a gesture mark you want to set.■ [Initialise]Return to the initial setting. The confirmationmessage appears. Touch [Yes].3 Touch the function you want to set.4 Repeat steps 2 and 3 as necessary.5 Touch [ ].Special SetupYou can setup special parameters.1 Press the [MENU] button.hh Popup menu appears.2 Touch [SETUP].hh SETUP screen appears.3 Touch [Special].hh Special screen appears.4 Set each parameter as follows.■ [DEMO]Select the demonstration mode. Default is“ON”.■ [Software Information]Confirm the software version of this unit.(P.73)■ [Open Source Licenses]Display the open source licenses.■ [Initialise]Touch [Initialise] and then touch [Yes] to setall the settings to the initial default settings.• Audio SETUP Memory is not initialized.Ñ Software InformationYou can confirm the software version of thisunit.1 Touch [Software Information] in theSpecial screen.2 Confirm the software version.