Kenwood DDX9020DABS Instruction Manual

Setup72Ñ Touch panel adjustment1 Touch [Touch Panel Adjust] on the UserInterface screen.hh Touch Panel Adjust screen appears.2 Follow the instruction on the screen andlong touch the center of each [ ].12NOTE• To cancel the touch panel adjustment, touch[Cancel].• To reset it to the default, touch [Reset].Ñ Adjust the date and timemanually1 Touch [Clock] on the User Interface screen.2 Select [Manual].3 Touch [Time Zone] on the User Interfacescreen.4 Select the time zone.5 Touch [Clock Adjust] on the User Interfacescreen.6 Adjust the date, then adjust the time.7 Touch [Set].Ñ Learning function of steeringremoteThis function is available only when yourvehicle is equipped with the electrical steeringremote controller.If your steering remote controller is notcompliant, learning may not be completedand error message may appear.1 Touch [Steering Remote Controller] inthe User Interface screen.hh Steering Remote Controller Settingscreen appears.2 Press and hold the steering remotecontroller button.NOTE• You can have the unit learned all buttonsat a time. In that case, press all buttons oneat a time and after pressing all of them,touch [Learning completed] in SteeringRemote Controller Setting screen. However,new functions cannot be learned after thisoperation.3 Touch the function you want to set.4 Repeat steps 2 and 3 as necessary.