Kenwood DDX9020DABS Instruction Manual

Other External Components67English6 [Left] * 2Assign left position to the view cameraconnected to the selected input terminal.7 [None] * 2Assign no position to the view cameraconnected to the selected input terminal.*1 The [REAR VIEW CAMERA] and [FRONTVIEW CAMERA / DASH CAM] settingscreens only.*2 Except the [REAR VIEW CAMERA] settingscreen.4 Touch [Enter].NOTE• The screen shot above is for the [FRONT VIEWCAMERA / DASH CAM] setting screen. It maybe different from the ones for [REAR VIEWCAMERA] , [FRONT VIEW CAMERA] and[AV-IN].• The Dashboard Camera can be selected when itis connected. (DDX9020DABS / DDX920WDABS /DMX8520DABS only) (P.102)Ñ To adjust the parkingguidelinesNOTE• Install the rear view camera in the appropriateposition according to the instruction manualsupplied with the rear view camera.• When adjusting the parking guidelines, makesure to apply the parking brake to prevent the carfrom moving.1 Touch [Parking Guidelines] in the Camerascreen and set to [ON]. (P.65)2 Touch [Guidelines SETUP] on the Camerascreen.3 Adjust the parking guidelines byselecting the mark.4 Adjusting the position of the selectedmark.ABC DMake sure that lines A and B arehorizontally parallel, and that lines C andD are of the same length.NOTE• Touch [Initialise] and then touch [Yes] to set allthe marks to their initial default position.Use Dashboard Camera(DDX9020DABS /DDX920WDABS /DMX8520DABS only)A Dashboard Camera, DRV-N520 (optionalaccessory), connected to this unit lets you playvideo-recorded data and so on.For details, see the instruction manual ofthe Dashboard Camera DRV-N520 (optionalaccessory).NOTE• To connect a dashboard camera, see Connectingthe camera (P.102).• To use the dashboard camera function, it isnecessary to set “Camera Assignment Settings” to“Dashboard Camera”. (P.66)