71Return to the Top pageSetting UpSystem SetupNOTE• Each operation in this section can be started fromthe multi function menu.1 Touch [Menu] on any screen.TOP Menu screen appears.2 Touch [SETUP].3 Touch [System].System Menu screen appears.See the following section for each setting.• Set up the user interface (P.71)• Adjust touch panel (P.72)• Set up security (P.72)• Set up external switch (P.73)• Set up memory (P.73)User interfaceYou can setup user interface parameters.1 Touch [User Interface] in the list.User Interface screen appears.2 Set each item as follows.BeepTurns the key touch tone on or off.Default is “ON”.Remote SensorSelects a remote control signal. Default is “ON”.LanguageSelect the language used for the controlscreen and setting items. See Language setup(P.72).Text ScrollAllows scrolling of text display on the sourcecontrol screen. Select from “Auto”/”Once”/”OFF”.Auto (Default): Scrolls the text automatically.Once: Allows you to scroll the text only onceautomatically when updated.OFF: Does not scroll the text automatically.Drawer CloseSets whether to close the common menu (P.16)automatically. Default is “Auto”.AnimationSets whether to display animation. Default is “ON”.SecondarySets whether to display the navigationinformation in the audio screen or vice versa.Default is “ON”.Panel Switch SensitivityAdjusts the sensitivity of the front panel button(ATT button, etc.)High: Sets sensitivity to high.Middle (Default): Sets sensitivity to middle.Low: Sets sensitivity to low.
