4444Return to the Top pageRadio, HD Radio, SIRIUS, XMRadio/HD Radio Basic OperationMost functions can be controlled from the source control screen.NOTE• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operationmode (P.91).• Ready to receive HD Radio™ broadcasts when connected to the KTC-HR300/KTC-HR200, sold separately.• HD Radio is for North American sales area only.• The screen shot below is for tuner. It may be different from the one for HD Radio.213 34 45 8627Simple Control screen List Control screen1 PS/Station name displayDisplays the PS name or station name.2 Information display/Control switching areaDisplays the following information.• [FM1] etc.: Band display• MHz/kHz: Frequency display• Preset #: Preset number• HD# (HD Radio only): Channel displayTouch to switch between the Simple Control and List Control screen.3 Multi function keyTouch to switch the multi function menu. For details on the menu, see Multi function menu (P.45).4 Preset key/Multi function menuRecalls the memorized station or channel. When touched for 2 seconds, stores the current receivingstation or channel in memory.When switched, various functions can be performed by using keys in this area.For details on the menu, see Multi function menu (P.45).5 Sub function keyTouch to display “Sub function menu” (7 in this table).6 Preset listDisplays the list of preset stations or channels and the information.Radio, HD Radio™ And Satellite Radio Operation