73Return to the Top pageSetting UpEXT SW setupSet up the external switch power mode.1 Touch [EXT SW] in the System Menuscreen.EXT SW screen appears.2 Set each item as follows.SW1 Name/SW2 NameSets the name of the external device.Output PatternSets the power signal output mode among“Pulse”/“Level”. Default for EXT SW1 is “Pulse”and for EXT SW2 is “Level”.You can set to turn output on/off each timethe button on the EXT SW screen is touched.See External Device Control (P.80).Pulse SetSets the pulse signal output time.Outputs 500ms when “1” is set.Increases by 200ms with each step. Up to 100steps can be set.NOTE• You can enter characters only after you haveapplied the parking brake.• “Pulse”: Generates a single power signal pulse.• “Level”: Continues output of high power signal.Setup memoryAudio Control, AV-IN SETUP, Navigation,Camera, and Audio SETUP settings can bememorized. The memorized settings can berecalled at any time. For example, even whenthe settings are cleared due to replacementof the battery, the settings can be restored.1 Touch [SETUP Memory] in the SystemMenu screen.SETUP Memory screen appears.2 Follow the instruction on the screen.[Lock]/[Unlock]*Locks or unlocks the AV-IN SETUP, Navigation,and Audio SETUP settings.YesMemorizes or recalls the settings.NoCancels the function or memorization.The SETUP Menu screen appears again.* When [Lock] is selected, you cannot changethe AV-IN SETUP, Navigation, and AudioSETUP settings.Also, the locked key mark is displayedunder each setting icon in the setup menu.Continued
