11Return to the Top pageBasic OperationsInitial setupPerform this setup when you use this unit first time or when you reset the unit (P.97).Set each item as follows.LanguageSelect the language used for the control screen and setting items. Default is “American English (en)”.1 Touch [SET].2 Touch [2] or [3] to select the desired language.3 Touch [Enter].For detailed operation, see Language setup (P.72).AngleAdjust the position of the monitor. Default is “0”.1 Touch [SET].2 Touch desired angle number and [ ].For detailed operation, see Monitor angle control (P.74).iPod AV Interface UseSet the terminal which your iPod is connected to. Default is “iPod”.1 Touch [iPod] or [AV-IN2].ColorSet the screen and button illumination color. You can select whether to allow color scan operation orselect a fixed color for operation.1 Touch [SET].2 Touch [ON] or [OFF] of [Panel Color Scan].3 If you want to change color, touch [SET] of [Panel Color Coordinate].4 Touch your desired color and [ ].For detailed operation, see Panel color coordinate (P.75).EXT SWControl the external devices.1 Touch [SET].2 Set device name, output pattern, and pulse set for each device. Then, touch [ ].For detailed operation, see EXT SW setup (P.73).CameraSet the parameters for the camera.1 Touch [SET].2 Set each item and touch [ ].For detailed operation, see Camera Setup (P.78).1Continued