85Return to the Top pageAudio Setting Up2 Set each item as follows.Fader #/Balance #Adjust the volume balance around thetouched area.[2] and [3] adjust the right and left volumebalance.[5] and [∞] adjust the front and rear volumebalance.Volume Offset*Finely adjust the volume of the current sourceto minimize the difference in volume betweendifferent sources.Subwoofer LevelAdjusts the subwoofer volume. This setting isnot available when subwoofer is set to “None”.See Speaker setup (P.81).Bass BoostSets the amount of bass boost among “OFF”/“Step1”/ “Step2”.LoudnessTurns the loudness control function on oroff. If turned on, high and low tones areautomatically enhanced during low volume.Settable only when zone function (P.87) is setto off.* If you have increased the volume first, thenreduced the volume using the “VolumeOffset”, the sound generated if yousuddenly switch to another source may beextremely loud.Equalizer ControlYou can adjust equalizer by selecting theoptimized setting for each category.If you use , you can also adjustequalizer manually.1 Touch [Equalizer].Equalizer screen appears.operationControlling EQ curves1 Select EQ curve from [Natural],[Rock], [Pops], [Easy], [Top40], [Jazz],[Game], [iPod], and [User].NOTE• [iPod] is available only during iPod source.