7Return to the Top pageBasic OperationsNumber Name Motion1 fi (Reset) • If the unit or the connected unit fails to operate properly, the unitreturns to factory settings when this button is pressed (P.97).• If the SI function is turned on, this indicator flashes when the vehicleignition is off (P.72).2 ATT • Switches attenuation of the volume on/off.• North America Sales area: Pressing for 1 second stores the tag data ofthe current music from HD Radio (P.51).• Central and South America sales area: Pressing for 1 second turns thescreen off.3 ∞, 5 (Vol) Adjusts volume.Holding down a key turns up the volume in series up to 25. For more than25, pressing the key turns up the volume one by one.4 AUD • Displays Graphic Equalizer screen (P.86).*• Pressing for 1 second switches camera view display on/off.5 NAV • Displays the navigation screen.• Pressing for 1 second switches AV out sources.• When the power off, turns the power on.6 MENU • Displays the Top Menu screen (P.14).• Pressing for 1 second turns the power off.• When the power off, turns the power on.7 TEL • Displays the Hands Free screen (P.55).• Pressing for 1 second displays the Screen Control screen.• When the power off, turns the power on.8 0 (Eject) • Ejects the disc.• Pressing for 1 second opens the panel to the location of the disc slot.When the panel is opened, pressing for 1 second closes the panel andpressing for 3 seconds ejects the disc forcibly.• When the panel is closed, pressing for 3 seconds fully opens the panel tothe location of the SD card slot.9 RemoteSensorReceives the remote control signal.You can enable or disable this feature by Remote Sensor (P.71).10 Disc insertslotA slot to insert a disc media.11 SD card slot An SD card slot for upgrading the map. For how to upgrade the map, referto the instruction manual of the navigation system.* The display may not switch to the Graphic Equalizer screen in some conditions.