Kenwood KDC-MP8533 Instruction Manual

14 | EnglishGeneral featuresStation/Disc Naming (SNPS/DNPS)Attaching a title to a Station or CD.1 Receive/play the station/disc you want toattach a title to• A title cannot be attached to MD or Audio file media.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Name set modePush the Control knob towards [FM] or [AM].Select the "Name Set" display.4 Enter Name set modePress the Control knob for at least 1 second.5 Move the cursor to the enter characterpositionPush the Control knob towards [4] or[¢].6 Select the character typePress the Control knob.Each time you press the knob, the character typealternates between the types shown in the tablebelow.Character typeAlphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)7 Select the charactersPush the Control knob towards [FM] or [AM].• Enter characters by using a remote control withnumbers buttons.Example: If you are entering "DANCE".Character Button Times pressed"D" [3] 1"A" [2] 1"N" [6] 2"C" [2] 3"E" [3] 28 Repeat steps 5 through 7 and enter the name.9 Exit Menu modePress the [MENU] button.• When operation stops for 10 seconds the name atthat time is registered, and Name Set mode closes.• Memory numbers- FM/ AM: 30 stations- Internal CD player: 10 discs- External CD changer/ player: Varies according to theCD changer/ player. Refer to the CD changer/ playermanual.• Change the title of station/CD by the same operationused to name it.Display Type SelectionChanging the display mode.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "DISP" isdisplayed above the [2] button.Refer to (page 8).2 Enter display control modePress the [2] ("DISP") button.3 Select the display modePress the [1] ("MODE") button.4 Select the display TypePush the Control knob towards [4] or[¢].Each time you push the knob, the display modealternates between the display modes shown inthe table below.