Kenwood KDC-MP8533 Instruction Manual

English | 293 Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or[¢].4 Exit Clock adjustment modePress the [MENU] button.In Standby modeDate Adjustment1 Select Date Adjust modePush the knob towards [FM] or [AM].Select the "Date Adjust" display.2 Enter Date Adjust modePress the Control knob for at least 1 second.The date display blinks.3 Selecting the item (day, month, or year) toadjustPush the Control knob towards [4] or[¢].The items that are blinking are items that youcan adjust.4 Adjust each itemPush the Control knob towards [FM] or [AM].5 Repeat step 3 and 4 operation and adjust thedate.6 Exit Date adjustment modePress the [MENU] button.In Standby modeDate ModeSetting the date format.1 Select Date ModePush the Control knob towards [FM] or [AM].Select the "Date Mode" display.2 Select the date formatPush the Control knob towards [4] or[¢].3 Exit Menu modePress the [MENU] button.In Standby modeDSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI : ON" LED flashes."DSI : OFF" LED OFF.In Standby modeSelectable IlluminationSelecting the button illumination color as greenor red.Display Setting"Button : Green" The illumination color is green."Button : Red" The illumination color is red.Display Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This functionis effective when you are driving at night.Display Setting"Display : ON" Keeps the display on."Display : OFF" Turns off the display when you perform nooperation for 5 seconds.• When the display is off, pressing any key will turn onthe display.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Ejecting the disc• Faceplate Angle Adjustment• Turning off the power• During function control, such as the Menu System, thedisplay stays on.