Kenwood KDC-MP8533 Instruction Manual

English | 21Function of remote controlDirect Access TuningEntering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.Station Preset MemoryPutting a station in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob towards [4] or[¢].3 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "[1]" — "[6]" aredisplayed above the [1] — [6] buttons.Refer to (page 8).4 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPush the Control knob towards [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.Preset TuningRecalling the stations in the memory.1 Select the bandPush the Control knob towards [FM] or [AM].2 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "[1]" — "[6]" aredisplayed above the [1] — [6] buttons.Refer to (page 8).3 Recall the stationPress the desired [1] — [6] button.Frequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [1] and [5] buttons, pressthe [SRC] button.Release your fingers from the button after thedisplay appears.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.• When the same operation is repeated, the frequencystep returns to the original setting.• When the frequency step is changed, the frequenciesin the memory are deleted.