Kenwood KDC-MP8533 Instruction Manual

32 | EnglishMenu systemIn Standby modeBuilt-in Auxiliary input SettingSet the Built-in Auxiliary Input function.Display Setting"Built in AUX : OFF" When selecting the source there’s no AuxiliaryInput."Built in AUX : ON" When selecting the source there’s AuxiliaryInput.In Standby modeCD Read SettingWhen there is a problem with playing a CD withspecial format, this setting plays the CD by force.Display Setting"CD Read : 1" Play CD and Audio file."CD Read : 2" Play CD by force.• Setting "CD Read : 2" cannot play Audio file.Some music CDs may not play even in the "CD Read: 2" mode.Other than Standby modeAudio Preset MemoryRegistering the value setup by Sound Control. Thememory cannot be erased by the Reset button.1 Setup Sound ControlRefer to the following operations to setup theSound Control.-

2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Audio Preset modePush the Control knob towards [FM] or [AM].Select the "Audio Preset" display.4 Enter Audio Preset modePress the Control knob for at least 1 second.5 Select the Audio Preset MemoryPush the Control knob towards [FM] or [AM].Select the "Memory" display.6 Put the Audio Preset in the memoryPress the Control knob for at least 2 seconds.The "Memory" display blinks 1 time.7 Exit Audio Preset modePress the [MENU] button.• Register 1 pair of Audio Preset Memory. You cannotregister by the source.• When you press the Reset, all the sources will be thesetting value which is registered.• The following items cannot be registered.Volume, Balance, Fader, Loudness, Volume offset, DualZone System, Rear VolumeOther than Standby modeAudio Preset RecallRecalling the sound setup registered by Preset Memory> (page 32).1 Select the sourcePress the [SRC] button.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Audio Preset modePush the Control knob towards [FM] or [AM].Select the "Audio Preset" display.4 Enter Audio Preset modePress the Control knob for at least 1 second.5 Select the Audio Preset RecallPush the Control knob towards [FM] or [AM].Select the "Recall" display.6 Recall the Audio PresetPress the Control knob for at least 2 seconds.The "Recall" display blinks 1 time.7 Exit Audio Preset modePress the [MENU] button.• The User memory of (page 10) ischanged to the value which was recalled.• The source tone memory item of

(page 10) is changed to the value which was recalledby the selected source.