Kenwood KDC-W7037 Instruction Manual

Kenwood KDC-W7037 Instruction Manual Manual pdf 14 page image

14 | EnglishGeneral featuresExternal Display SelectionChanging the display in the connected ExternalDisplay.1 Enter External display select modeUsing the Control knob, select "DISP" > "DOUT".For the operation method, refer to Control mode> (page 10)."DISP Out Select" is displayed.2 Select the displayTurn the Control knob or push it towards leftor right.Select your desired display.3 Exit display control modePress the Control knob.Theft Deterrent FaceplateThe faceplate of the unit can be detached and takenwith you, helping to deter theft.Removing the Faceplate1 Press the Release button.Drop open the faceplate.2 Drawing the faceplate to left side pull it toforward and remove it.¤• The faceplate is a precision piece of equipment and canbe damaged by shocks or jolts.• Keep the faceplate in its faceplate case while detached.• Do not expose the faceplate (and the faceplate case) todirect sunlight or excessive heat or humidity. Also avoidplaces with too much dust or the possibility of watersplashing.Reattaching the Faceplate1 Align the shaft on the unit with the depressionon the faceplate.2 Push the faceplate in until it clicks.The faceplate is locked in place, allowing you to usethe unit.